- Overview
- Product Description
- Product Parameters
- Packaging & Shipping
- Detailed Photos
Basic Info.
Model NO.
STR257
Material
Fiberglass
Weight
100g to 600g
Width
10cm to 2m
Length
10m to 200m
Transport Package
Pallet
Specification
STR-RM600/225
Trademark
STR
Origin
China
HS Code
70195900
Production Capacity
10000/Day
Product Description
Fiberglass biaxial(0°/90°) fabric
This fabric is made of fiberglass roving which are aligned at 0°/ 90°into two layers of roving by stitching together with or without a layer of chopped strand. It is mainly applied in the hand lay up, RTM and other close molding processes.
This fabric is compatible with UP Resin, Vinyl ester resin, epoxy resin system etc. It widely used in nacelles and blades for wind power, boat hull, cases and shell of auto etc.
Feature:
Small gap between fibers, Increased strength, reduced product weight and better surface finish.
low resin-consumption and faster wet-out.
Good manufacturability and mechanical properties
Improved fatigue and impact resistance
No binder
General parameters:
Items | Total Weight (g/m2) | The weight of each layers(g/m2) | Width(mm) | ||||
0° | 90° | +45° | -45° | CM layer | |||
STR-R400 | 410 | 210 | 200 | 200~2400 | |||
STR-R 600 | 620 | 330 | 290 | 200~2400 | |||
STR-R 800 | 810 | 420 | 390 | 200~2400 | |||
STR-R 1200 | 1210 | 680 | 530 | 200~2400 | |||
STR-R 1500 | 1520 | 790 | 730 | 200~2400 | |||
STR-R 1800 | 1830 | 920 | 910 | 200~2400 | |||
STR-R M600/225 | 825 | 300 | 300 | 225 | 200~2400 | ||
STR-R M600/300 | 900 | 300 | 300 | 300 | 200~2400 | ||
STR-R M600/450 | 1050 | 300 | 300 | 450 | 200~2400 | ||
STR-R M800/300 | 1100 | 400 | 400 | 300 | 200~2400 | ||
STR-R M1200/300 | 1500 | 600 | 600 | 300 | 200~2400 |
Packing:
Each roll is wrapped by PE film and then packed into carton. Stacking in bulk or palletized is available; the pallet shall be no higher than 2 layers.(1)How to produce the fiberglass biaxial fabric
(2)How to pack and load the fiberglass biaxial fabric
(3)The application of the fiberglass biaxial fabric